Arabinoxylans-Based Oral Insulin Delivery System Targeting the Colon: Simulation in a Human Intestinal Microbial Ecosystem and Evaluation in Diabetic Rats.

Arabinoxylans (AX) microcapsules loaded with insulin were prepared by enzymatic gelation of AX, using a triaxial electrospray method. The microcapsules presented a spherical shape, with an average size of 250 µm. The behavior of AX microcapsules was evaluated using a simulator of the human intestinal microbial ecosystem. AX microcapsules were mainly (70%) degraded in the ascending colon. The fermentation was completed in the descending colon, increasing the production of acetic, propionic, and butyric acids. In the three regions of the colon, the fermentation of AX microcapsules significantly increased populations of Bifidobacterium and Lactobacillus and decreased the population of Enterobacteriaceae. In addition, the results found in this in vitro model showed that the AX microcapsules could resist the simulated conditions of the upper gastrointestinal system and be a carrier for insulin delivery to the colon. The pharmacological activity of insulin-loaded AX microcapsules was evaluated after oral delivery in diabetic rats. AX microcapsules lowered the serum glucose levels in diabetic rats by 75%, with insulin doses of 25 and 50 IU/kg. The hypoglycemic effect and the insulin levels remained for more than 48 h. Oral relative bioavailability was 13 and 8.7% for the 25 and 50 IU/kg doses, respectively. These results indicate that AX microcapsules are a promising microbiota-activated system for oral insulin delivery in the colon.

Chitosan Hydrogels Based on the Diels-Alder Click Reaction: Rheological and Kinetic Study.

The Diels-Alder reaction is recognized to generate highly selective and regiospecific cycloadducts. In this study, we carried out a rheological and kinetic study of N-furfuryl chitosan hydrogels based on the Diels-Alder click reaction with different poly(ethylene)glycol-maleimide derivatives in dilute aqueous acidic solutions. It was possible to prepare clear and transparent hydrogels with excellent mechanical properties. Applying the Winter and Chambon criterion the gel times were estimated at different temperatures, and the activation energy was calculated. The higher the temperature of gelation, the higher the reaction rate. The crosslinking density and the elastic properties seem to be controlled by the diffusion of the polymer segments, rather than by the kinetics of the reaction. An increase in the concentration of any of the two functional groups is accompanied by a higher crosslinking density regardless maleimide:furan molar ratio. The hydrogel showed an improvement in their mechanical properties as the temperature increases up to 70 °C. Above that, there is a drop in G' values indicating that there is a process opposing to the Diels-Alder reaction, most likely the retro-Diels-Alder.

Ferulated Pectins and Ferulated Arabinoxylans Mixed Gel for Saccharomyces boulardii Entrapment in Electrosprayed Microbeads.

Ferulated polysaccharides such as pectin and arabinoxylan form covalent gels which are attractive for drug delivery or cell immobilization. Saccharomyces boulardii is a probiotic yeast known for providing humans with health benefits; however, its application is limited by viability loss under environmental stress. In this study, ferulated pectin from sugar beet solid waste (SBWP) and ferulated arabinoxylan from maize bioethanol waste (AX) were used to form a covalent mixed gel, which was in turn used to entrap S. boulardii (2.08 × 108 cells/mL) in microbeads using electrospray. SBWP presented a low degree of esterification (30%), which allowed gelation through Ca2+, making it possible to reduce microbead aggregation and coalescence by curing the particles in a 2% CaCl2 cross-linking solution. SBWP/AX and SBWP/AX+ S. boulardii microbeads presented a diameter of 214 and 344 µm, respectively, and a covalent cross-linking content (dimers di-FA and trimer tri-FA of ferulic acid) of 1.15 mg/g polysaccharide. The 8-5', 8-O-4'and 5-5'di-FA isomers proportions were 79%, 18%, and 3%, respectively. Confocal laser scanning microscopy images of propidium iodide-stained yeasts confirmed cell viability before and after microbeads preparation by electrospray. SBWP/AX capability to entrap S. boulardii would represent an alternative for probiotic immobilization in tailored biomaterials and an opportunity for sustainable waste upcycling to value-added products.

Acemannan Gels and Aerogels.

The procedures to obtain two types of acemannan (AC) physical gels and their respective aerogels are reported. The gelation was induced by the diffusion of an alkali or a non-solvent, then supercritical CO2 drying technology was used to remove the solvent out and generate the AC aerogels. Fourier-transform infrared spectroscopic analysis indicated that alkali diffusion produced extensive AC deacetylation. Conversely, the non-solvent treatment did not affect the chemical structure of AC. Both types of gels showed syneresis and the drying process induced further volume reduction. Both aerogels were mesoporous nanostructured materials with pore sizes up to 6.4 nm and specific surface areas over 370 m²/g. The AC physical gels and aerogels enable numerous possibilities of applications, joining the unique features of these materials with the functional and bioactive properties of the AC.

Enzymatic cross-linking of ferulated arabinoxylan: effect of laccase or peroxidase catalysis on the gel characteristics.

Arabinoxylans (AX) gels at 4% (w/v) were prepared using laccase (LAX gels) or peroxidase (PAX gels), and their cross-linking, rheological, structural, and spectroscopic characteristics were investigated. LAX gels presented lower amount of 5,5'-diferulic acid (11%), smaller mesh size (128 nm), and higher hardness (37 N) and elasticity (430 Pa) than the PAX gels (28%, 197 nm, 7 N, and 120 Pa, respectively). Microscopy of the LAX gels showed linked strands, while the system was less connected in the PAX gels. The Raman band at 2895 cm-1 of the LAX and PAX gels was less intense, indicating enhanced hydrogen bonding compared to that of AX. This decrease was less dramatic for the PAX gels. The greater content of 5,5'-diferulic acid in PAX gels could favor intrachain bonds, affecting their rheological, structural, and spectroscopic characteristics. Laccase may be a better option than peroxidase for AX gelation intended for food and biotechnological applications.

Efecto prebiótico de los Arabinoxilanos y los Arabinoxilo-Oligosacáridos y su relación con la promoción de la buena salud / Prebiotic effect of Arabinoxylans and Arabinoxylan-Oligosaccharides and the relationship with good health promotion

RESUMEN Los arabinoxilanos son polisacáridos presentes en los granos de los cereales, y como tales, forman parte de la fibra dietética consumida por humanos y animales. La hidrólisis química o enzimática de los arabinoxilanos produce arabinoxilo-oligosacáridos, los cuales pueden estar ramificados o no, con arabinosa. El objetivo de este trabajo fue exponer el uso potencial de los arabinoxilanos y arabinoxilo-oligosacáridos, como prebióticos, y el efecto de su consumo en la promoción de la buena salud, al estimular selectivamente el crecimiento y actividad metabólica de la microbiótica colónica benéfica. La información generada indica que los arabinoxilanos y arabinoxilo-oligosacáridos actúan modificando la microbiota de manera selectiva, y estimulan la respuesta biológica, favoreciendo la buena salud del hospedero, por su efecto antiobesogénico, regulador de la glucosa, antioxidante, anticancerígeno e inmunomodulador, con resultados similares o mejores en relación a prebióticos reconocidos. No obstante, es necesario ampliar el conocimiento que se tiene de ellos para sustentar su aplicación en la industria alimentaria, farmacéutica o biomédica.

ABSTRACT Arabinoxylans are polysaccharides present in grains and as such, are part of dietary fiber intake in humans and animals. Enzymatic or chemical hydrolysis of arabinoxylans produces arabinoxilo-oligosaccharides, which can be branched or unbranched with arabinose. The objective of this work was to describe the potential use of arabinoxylans and arabinoxylan-oligosaccharides as prebiotics to promote good health, by selective enhancement of beneficial colonic microbiota growth and metabolic activity. The information generated indicates that arabinoxylans and arabinoxylan-oligosaccharides act by modifying the microbiota selectively and stimulate the biological response favoring good health in the host, by antio-obesity effect, glucose regulator, antioxidant, anticancer, immunomodulator, with similar or better results than recognized prebiotics. However, it is necessary to expand the knowledge we have about arabinoxylans in order to support their application in the food, pharmaceutical, and biomedical industry.

Production and characterization of supercritical CO2 dried chitosan nanoparticles as novel carrier device.

The materials produced by the supercritical CO2 drying have outstanding properties that allow the incorporation of molecules in their porous structure. In this context, dried chitosan nanoparticles including ß-lactoglobulin were obtained. First, the nanoparticles in water suspension were produced by ionotropic gelation incorporating the protein with high loading efficiency. Later, solvent exchange and CO2 supercritical drying procedures were performed. The physicochemical characteristics and structural properties were determined, demonstrating a stable porous structure in the dried materials and corroborating the presence of the protein after the drying. The CO2 supercritical dried chitosan nanoparticles can be effectively resuspended in acidic aqueous medium remaining in the nanoscale with minimum effect on the loading parameters. The release of the ß-lactoglobulin was highly influenced by the pH, reaching around 40% under acidic conditions in ten hours. The obtained results demonstrate the possibility to apply these chitosan materials as a controlled release material.

Pectin and Pectin-Based Composite Materials: Beyond Food Texture.

Pectins are plant cell wall natural heteropolysaccharides composed mainly of α-1-4 d-galacturonic acid units, which may or may not be methyl esterified, possesses neutral sugars branching that harbor functional moieties. Physicochemical features as pH, temperature, ions concentration, and cosolute presence, affect directly the extraction yield and gelling capacity of pectins. The chemical and structural features of this polysaccharide enables its interaction with a wide range of molecules, a property that scientists profit from to form new composite matrices for target/controlled delivery of therapeutic molecules, genes or cells. Considered a prebiotic dietary fiber, pectins meetmany regulations easily, regarding health applications within the pharmaceutical industry as a raw material and as an agent for the prevention of cancer. Thus, this review lists many emergent pectin-based composite materials which will probably palliate the impact of obesity, diabetes and heart disease, aid to forestall actual epidemics, expand the ken of food additives and food products design.

Rheology and microstructure of gels based on wheat arabinoxylans enzymatically modified in arabinose to xylose ratio.

BACKGROUND: Arabinoxylans (AX) are polysaccharides consisting of a backbone of xyloses with arabinose substituents ester-linked to ferulic acid (FA). The arabinose to xylose ratio (A/X) in AX may vary from 0.3 to 1.1. AX form covalent gels by cross-linking of FA but physical interactions between AX chains also contribute to the network formation. The present study aimed to investigate the rheological and microstructural characteristics of gels based on AX enzymatically modified in A/X. RESULTS: Tailored AX presented A/X ranging from 0.68 to 0.51 and formed covalent gels. Dimers of FA content and elasticity (G') increased from 0.31 to 0.39 g kg-1 AX and from 106 to 164 Pa when the A/X in the polysaccharide decreased from 0.68 to 0.51. Atomic force microscopy images of AX gels showed a sponge-like microstructure at A/X = 0.68, whereas, at lower values, gels presented a more compact microstructure. Scanning electron microscopy analysis of AX gels show an arrangement of different morphology, passing from an imperfect honeycomb (A/X = 0.68) to a flake-like microstructure (A/X = 0.51). CONCLUSION: Lower A/X values favor the aggregation of AX chains resulting in an increase in di-FA content, which improves the rheological and microstructural characteristics of the gel formed. © 2017 Society of Chemical Industry.

Aerogels from Chitosan Solutions in Ionic Liquids.

Chitosan aerogels conjugates the characteristics of nanostructured porous materials, i.e., extended specific surface area and nano scale porosity, with the remarkable functional properties of chitosan. Aerogels were obtained from solutions of chitosan in ionic liquids (ILs), 1-butyl-3-methylimidazolium acetate (BMIMAc), and 1-ethyl-3-methyl-imidazolium acetate (EMIMAc), in order to observe the effect of the solvent in the structural characteristics of this type of materials. The process of elaboration of aerogels comprised the formation of physical gels through anti-solvent vapor diffusion, liquid phase exchange, and supercritical CO2 drying. The aerogels maintained the chemical identity of chitosan according to Fourier transform infrared spectrophotometer (FT-IR) spectroscopy, indicating the presence of their characteristic functional groups. The internal structure of the obtained aerogels appears as porous aggregated networks in microscopy images. The obtained materials have specific surface areas over 350 m²/g and can be considered mesoporous. According to swelling experiments, the chitosan aerogels could absorb between three and six times their weight of water. However, the swelling and diffusion coefficient decreased at higher temperatures. The structural characteristics of chitosan aerogels that are obtained from ionic liquids are distinctive and could be related to solvation dynamic at the initial state.

Syneresis in Gels of Highly Ferulated Arabinoxylans: Characterization of Covalent Cross-Linking, Rheology, and Microstructure.

Arabinoxylans (AXs) with high ferulic acid (FA) content (7.18 µg/mg AXs) were cross-linked using laccase. Storage (G') modulus of AX solutions at 1% (AX-1) and 2% (AX-2) (w/v) registered maximum values of 409 Pa and 889 Pa at 180 min and 83 min, respectively. Atomic force microscopy revealed the grained and irregular surface of the AX-1 gel and the smoother surface without significant depressions of the AX-2 gel. Cured AX gels exhibited a liquid phase surrounding the samples indicating syneresis. The syneresis ratio percentage (% Rs) of the gels was registered over time reaching stabilization at 20 h. The % Rs was not significantly different between AX-1 (60.0%) and AX-2 (62.8%) gels. After 20 h of syneresis development, the dimers of the FA in the AX-1 and AX-2 gels significantly increased by 9% and 78%, respectively; moreover, the trimers of the FA in the AX-1 and AX-2 gels, by 94% and 300%, respectively. Scanning electron microscopy showed that, after syneresis stabilization, AX gels presented a more compact microstructure. Syneresis development in the gels of highly ferulated AXs could be related to the polymer network contraction due to the additional formation of dimers and trimers of the FA (cross-linking structures), which may act like a "zipping" process, increasing the polymer chains' connectivity.

In vitro degradation of covalently cross-linked arabinoxylan hydrogels by bifidobacteria.

Arabinoxylan gels with different cross-linking densities, swelling ratios, and rheological properties were obtained by increasing the concentration of arabinoxylan from 4 to 6% (w/v) during oxidative gelation by laccase. The degradation of these covalently cross-linked gels by a mixture of two Bifidobacterium strains (Bifidobacterium longum and Bifidobacterium adolescentis) was investigated. The kinetics of the evolution of structural morphology of the arabinoxylan gel, the carbohydrate utilization profiles and the bacterial production of short-acid fatty acid (SCFA) were measured. Scanning electron microscopy analysis of the degraded gels showed multiple cavity structures resulting from the bacterial action. The total SCFA decreased when the degree of cross-linking increased in the gels. A slower fermentation of arabinoxylan chains was obtained for arabinoxylan gels with more dense network structures. These results suggest that the differences in the structural features and properties studied in this work affect the degradation time of the arabinoxylan gels.

Entrapment of probiotics in water extractable arabinoxylan gels: rheological and microstructural characterization.

Due to their porous structure, aqueous environment and dietary fiber nature arabinoxylan (AX) gels could have potential applications for colon-specific therapeutic molecule delivery. In addition, prebiotic and health related effects of AX have been previously demonstrated. It has been also reported that cross-linked AX can be degraded by bacteria from the intestinal microbiota. However, AX gels have not been abundantly studied as carrier systems and there is no information available concerning their capability to entrap cells. In this regard, probiotic bacteria such as Bifidobacterium longum have been the focus of intense research activity lately. The objective of this research was to investigate the entrapment of probiotic B. longum in AX gels. AX solution at 2% (w/v) containing B. longum (1 × 107 CFU/cm) formed gels induced by laccase as cross-linking agent. The entrapment of B. longum decreased gel elasticity from 31 to 23 Pa, probably by affecting the physical interactions taking place between WEAX chains. Images of AX gels containing B. longum viewed under a scanning electron microscope show the gel network with the bacterial cells entrapped inside. The microstructure of these gels resembles that of an imperfect honeycomb. The results suggest that AX gels can be potential candidates for the entrapment of probiotics.

Characterization of water extractable arabinoxylans from a spring wheat flour: rheological properties and microstructure.

In the present study water extractable arabinoxylans (WEAX) from a Mexican spring wheat flour (cv. Tacupeto F2001) were isolated, characterized and gelled and the gel rheological properties and microstructure were investigated. These WEAX presented an arabinose to xylose ratio of 0.66, a ferulic acid and diferulic acid content of 0.526 and 0.036 µg/mg WEAX, respectively and a Fourier Transform Infra-Red (FT-IR) spectrum typical of arabinoxylans. The intrinsic viscosity and viscosimetric molecular weight values for WEAX were 3.5 dL/g and 504 kDa, respectively. WEAX solution at 2% (w/v) formed gels induced by a laccase as cross-linking agent. Cured WEAX gels registered storage (G') and loss (G'') modulus values of 31 and 5 Pa, respectively and a diferulic acid content of 0.12 µg/mg WEAX, only traces of triferulic acid were detected. Scanning electron microscopy analysis of the lyophilized WEAX gels showed that this material resembles that of an imperfect honeycomb.

Arabinoxylan microspheres: structural and textural characteristics.

The aim of this research was to study the structural and textural characteristics of maize bran arabinoxylan (MBAX) microspheres. The laccase-induced cross-linking process was monitored by storage (G') and loss (G'') moduli changes in a 4% (w/v) MBAX solution. The G' and G'' values at the plateau region were 215 and 4 Pa, respectively. After gelation, the content of ferulic acid dimers decreased from 0.135 to 0.03 µg/mg MBAX, suggesting the formation of ferulated structures unreleased by mild alkaline hydrolysis. MBAX microspheres presented an average diameter of 531 µm and a swelling ratio value (q) of 18 g water/g MBAX. The structural parameters of MBAX microspheres were calculated from equilibrium swelling experiments, presenting an average mesh size of 52 nm. Microstructure and textural properties of dried MBAX microspheres were studied by scanning electron microscopy and nitrogen adsorption/desorption isotherms, respectively, showing a heterogeneous mesoporous and macroporous structure throughout the network.

The peroxidase/H2O2 system as a free radical-generating agent for gelling maize bran arabinoxylans: rheological and structural properties.

The oxidative gelation of maize bran arabinoxylans (MBAX) using a peroxidase/H(2)O(2) system as a free radical-generating agent was investigated. The peroxidase/H(2)O(2) system led to the formation of dimers and trimer of ferulic acid as covalent cross-link structures in the MBAX network. MBAX gels at 4% (w/v) presented a storage modulus of 180 Pa. The structural parameters of MBAX gels were calculated from swelling experiments. MBAX gels presented a molecular weight between two cross-links (Mc), a cross-linking density (ρ(c)) and a mesh size (x) of 49 × 103 g/mol, 30 × 10-6 mol/cm3 and 193 nm, respectively.

Structural characterization of mesquite (Prosopis velutina) gum and its fractions.

Structural and physicochemical characteristics of mesquite gum (from Prosopis velutina) were investigated using FT-IR spectroscopic, mass spectrometric and chromatographic methods. Four fractions (F-I, F-IIa, F-IIb and F-III) were isolated by hydrophobic interaction chromatography. The samples were characterized and analyzed for their monosaccharide and oligomers composition by high performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). L-Arabinose (L-Ara) and D-galactose (D-Gal) were found as the main carbohydrate constituent residues in the polysaccharides from mesquite gum and their ratio (L-Ara/D-Gal) varied within the range 2.54 to 3.06 among the various fractions. Small amounts of D-glucose (D-Glc), D-mannose (D-Man) and D-xylose (D-Xyl) were also detected, particularly in Fractions IIa, IIb and III. Infrared spectroscopy identified polysaccharides and protein in all the samples. Data from mass spectrometry (MALDI-TOF MS) was consistent with the idea that the structure corresponding to the periphereal chains of Fraction I is predominantly a chain of pentoses attached to uronic acid.

Lisina total, digestible y reactiva digestible en harina de pescado / Total, digestible and digestible reactive lysine contents in fishmeal

El objetivo del estudio fue determinar y comparar lisina total, lisina reactiva, lisina total digestible y lisina reactiva digestible en harina de pescado peletizada (HPP) y extrusionada (HPE), ésta última como indicador de disponibilidad de lisina, la cual puede afectarse por almacenamiento prolongado o por procesamiento térmico inadecuado. Se utilizaron 29 ratas Sprague-Dawley (Rattus norvergicus) de 100 ±5 g de peso promedio, alojadas individualmente bajo condiciones controladas. Nueve ratas se alimentaron con una dieta a base de caseína hidrolizada enzimáticamente (CHE); las 20 ratas restantes se dividieron en dos grupos de diez y se alimentaron durante 16 días, con una dieta a base de HPP y HPE, respectivamente, con óxido de cromo como marcador indigestible. Las ratas se sacrificaron con cloroformo confinadas en un desecador y en cada una se retiró una porción de 20 cm del íleon por perfusión intraluminal con agua destilada. En HPP y HPE, en las dietas y en las digestas se determinó cromo por absorción atómica, mientras que lisina total y lisina reactiva, después de la reacción con O-metilisourea para formar homoarginina, por cromatografía líquida de alta resolución. La digestibilidad ileal verdadera de lisina reactiva fue determinada después de corregir por pérdida endógena de lisina de las ratas alimentadas con CHE seguida por ultrafiltración de la digesta (10,000 Da). El contenido de lisina total para HPP y HPE fue de 5,7 y 5,5 por ciento y de lisina reactiva 5,1 y 4,4 por ciento, respectivamente. El contenido de lisina digestible fue de 5,5 por ciento y 5,1 por ciento y de lisina reactiva digestible de 4,5 y 3,8 por ciento, respectivamente. La lisina digestible sobreestimó el contenido de lisina en un 22,2 por ciento para HPP y en un 34,2 por ciento para HPE. El valor de lisina reactiva digestible de HPP fue similar al de lisina disponible reportado de 4,2 y 4,3 por ciento. La determinación de lisina reactiva disgestible es un inidicador confiable de...

The aim of the study was to determine and compare total, reactive, digestible and digestible reactive lysine contents in pelletized (PF) and extruded fishmeal (EF), the latest as an indicator of available lysine, which could be affected by prolonged storage or inadequate thermal processing. Twenty nine Sprague-Dawley male rats with an average initial weight of 100 ± 5 g divided into three groups were used, which were individually allocated under control conditions. Nine rats were fed with a diet based in enzymically hydrolyzed casein to determine endogenous ileal aminoacid flow. The another twenty rats were divided into two groups of ten rats and were fed with PF and EF base diets containing chromic oxide as indigestible marker for sixteen days. The rats were sacrificed to remove 20 cm of the terminal ileum. In PF and PE, diets and ileal digests, chromic oxide was determined by atomic absorption, total and reactive lysine after reaction of these materials with O-methylisourea to form homoarginine by high pressure liquid chromatography. True reactive lysine digestibility was determined after correcting for endogenous lysine loss at the terminal ileum of rats fed an enzyme hydrolyzed casein-based diet, followed by ultrafiltration of the digest (10,000 Da). Total and reactive lysine contents for PF and EF were 5.7 and 5.5%; 5.1 and 4.4% respectively. Digestible lysine and digestible reactive lysine were 5.5 and 5.1%; 4.5 and 3.8% respectively. Digestible lysine overestimates lysine contents in 22.2% for PF and 34.2% for EF. Digestible reactive lysine value for PF was similar to available lysine values reported in literature of 4.2 and 4.3%. Digestible reactive lysine could be considered as a good indicator of lysine availability.

Goma de mezquite: una alternativa de uso industrial / Mesquite gum: alternative of industrial use

El mezquite es una leguminosa ampliamente distribuida en las zonas áridas y semiáridas del mundo. En condiciones de estrés, el árbol secreta en su corteza un exudado gomoso vítreo conocido como goma de mezquite. Este polisacárido es una arabinogalactana proteica cuyas propiedades químicas, macromoleculares y funcionales son similares a las de la goma arábiga, producto de múltiples usos industriales particularmente en alimentos, bebidas y farmacia. La goma arábiga, obtenida a escala industrial de la corteza de Acacia senegal y A. seyal en varios países de Africa, ha satisfecho por décadas la demanda a nivel mundial; sin embargo, su escasez periódica e inseguridad en el suministro y precios, conllevan a la búsqueda de otras fuentes botánicas de goma capaces de remplazar a la goma arábiga. Dentro de éstas, la goma de mezquite reviste un interés especial, toda vez que ambas comparten características fisicoquímicas y funcionales. La relación entre las características químicas, la arquitectura macromolecular y las propiedades emulsificantes de los componentes de la goma de mezquite sugieren que puede competir exitosamente, desde el punto de vista técnico, con la goma arábiga

Macromolecular dimensions and mechanical properties of monolayer films of Sonorean mesquite gum.

Mesquite gum sourced from Prosopis velutina trees and gum arabic (Acacia spp.) were characterized using light scattering and Langmuir isotherms. Both gum materials were fractionated by hydrophobic interaction chromatography, yielding four fractions for both gums: FI, FIIa, FIIb and FIII in mesquite gum and FI, FII, FIIIa and FIIIb in gum arabic. In mesquite gum, the obtained fractions had different protein content (7.18-38.60 wt.-%) and macromolecular dimensions (M approximately 3.89 x 10(5)-8.06 x 10(5) g.mol(-1), RG approximately 48.83-71.11 nm, RH approximately 9.61-24.06 nm) and architecture given by the structure factor (RG/RH ratio approximately 2.96-5.27). The mechanical properties of Langmuir monolayers at the air-water interface were very different on each gum and their fractions. For mesquite gum, the most active species at the interface were those comprised in Fractions IIa and IIb and III, while Fraction I the pi/A isotherm lied below that of the whole gum. In gum arabic only Fraction III developed greater surface pressure at the same surface per milligram of material than whole gum. This is rationalized in terms of structural differences in both materials. Mesquite gum tertiary structure seems to fit best with an elongated polydisperse macrocoil in agreement with the "twisted hairy rope" proposal for arabinogalactan proteoglycans.